Coverage Rate
If one coat application is desired, apply 1 coat at 50 sq/ft per gallon. If applying in 2 coats, apply each coat at 1 gallon per 100 sq/ft. Finished coverage will be the same, at covering 250 sq/ft of roof surface per 5 gallon bucket.. Textured, porous, and worn surfaces may require more product to cover.
Dry Time
Rain Safe: 60 minutes. Dry to Re-coat 6 hours, Full Cure 72 Hours at 70 °F and 50% relative humidity at 2 gallons per square; dry times will be accelerated by higher temperatures and higher humidity; cooler weather, thicker films, poor air flow and low humidity can slow dry time.
Products we use from Enecon
ENESEAL HR
ENESEAL HR is a single component, water based, liquid ceramic-filled membrane which cures to a durable, seamless, flexible “skin” that refracts and reflects heat while providing a moisture resistant barrier to virtually any type of surface…i.e., all types of insulation, plastics, concrete, brick, block, slate, tiles, wood, metal, bitumen, glass, tar/asphalts, etc.
ENESEAL HR is easily applied by brush, roller or spray. Because it’s water based, cleanup is quick and easy with soap and water. Completely non-toxic and
non-flammable.
ENECRETE DuraFill
ENECRETE DuraFill is a two component, 100% solids, high performance polymer system specifically designed for broadcast flooring applications as well as for filling deeper holes and cavities in concrete. In both cases, the DuraFill is combined with locally sourced aggregates to provide unrivaled performance in some of the most demanding floor repair and protection applications.
DuraFill is not only for concrete; it will also bond to marble, slate, stone, brick, terrazzo, tiles, most metals, wood…even rigid plastics and glass!
ENESEAL CR
UV resistant, liquid elastomeric coating system which dries to a highly durable, seamless, weather resistant, protective ‘skin’.
ENESEAL CR is a single component, water based, liquid coating which dries to a highly durable, corrosion resistant, elastomeric ‘skin’ that provides extraordinary environmental protection to metal and concrete / masonry surfaces. It can also be applied as a top coat over most zinc primers.
ENESEAL CR incorporates a unique blend of corrosion inhibitors, UV resistant resins and pigments, erosion resistant inorganic fillers and elastomeric acrylic polymers in order to provide outstanding performance in all types of demanding industrial and marine environments. Easily applied by brush, roller or spray,
ENESEAL CR cleans up quickly and easily with just soap and water.
